NEW CAN-AM MAVERICK X3 900 HO
The introduction the 2018 Maverick X3 900 HO extends the Can-Am X3 side-by-side vehicle's industry superiority to the hordes of performance enthusiasts, but does so at an exceptional value.
Sharing the same core DNA and many of the same features as the most powerful factory-built side-by-side vehicle on the market, the turbocharged 172hp Can-Am Maverick X3 X rs Turbo R side-by-side vehicle, the all-new, 90hp X3 900 HO vehicle remains defiant, precise and powerful in its makeup.
A few strategic package changes compared to its high-horsepower sibling create a well-equipped 64-in. (162.5 cm) wide vehicle that's superbly proficient in a wide variety of terrain.
TRADEMARK CAN-AM DNA WITH A NEXT GENERATION LOOK AND CAPABILITY
- Exclusive coloration and components
The 90hp Maverick X3 900 HO package is available in an exclusive and energetic Can-Am Red coloration, complete with a black cage and black wheels.
- Unique and unprecedented design
The new Can-Am Maverick X3 900 HO has the same industry-altering Maverick X3 family design to create a similar experience for both driver and passenger. Its performance-driven mechanical and structural designs meet demanding off-road settings, while its ample performance will continue to build recreational memories for sporty enthusiasts.
- Intensified Can-Am DNA
The Can-Am Maverick X3 side-by-side vehicle has a superior fit and finish, and the advanced design focuses squarely on the driver and passenger. Its unique visual statement starts in the front with a distinctive Can-Am family appearance, then moves through the advanced cockpit, complete with push-button start/stop, and ends with its aggressive and energetic rear end.
LOW SEATS, BOLD STANCE
- Low seating position
All Can-Am Maverick X3 side-by-side vehicles have a low seating position that encapsulates both driver and passenger so they feel at one with the vehicle and connected to its every move.
- Elevated ground clearance
The Maverick X3 900 HO family of rock-ready side-by-side vehicles features excellent ground clearance to accommodate varying conditions. Its high and dominant posture ensures optimal off-road capabilities with no compromise to line-of-sight.
- Smooth line of sight
The Can-Am Maverick X3 900 HO side-by-side vehicle is designed with a smooth line of sight to create an optimized field of vision for both occupants.
ADVANCED ERGO-LOK COCKPIT
- Optimized control positions
The Can-Am Maverick X3 side-by-side vehicles have everything in the right place with easy-to-access controls. The race-inspired, flat-bottom steering wheel tilts up to 25 degrees and has an integrated digital gauge for optimal visibility at any angle. There is also a panoramic mirror for excellent rear visibility to see other drivers lagging behind. The multifunction digital gauge includes a speedometer, tachometer, odometer, trip and hour meters, fuel, gear position, sport mode, ECO mode, seat belt and 4x4 indicator, diagnostics, clock and auto shut off.
- Superior mechanics
Like other Maverick X3 vehicles in the family, the Maverick X3 900 HO vehicle’s interior mechanical elements enhance the dynamic performance, seamlessly connecting the passenger to the vehicle. The interior is insightfully and purposefully configured, providing naturally positioned passenger grab bars, angled footrests for both the driver and passenger and a sports car-like centered accelerator and brake pedals.
- ErgoPrint seats
The same driver-focused, rally car-like seating the original Can-Am Maverick X3 vehicles made famous are included in the Maverick X3 900 HO. Designed for optimal positioning and ergonomics, the ErgoPrint seat shape is ideal for support and weight distribution, providing excellent comfort and bump absorption. The one-piece molded seats are four-way adjustable – 2-in. (5.1 cm) in height and 6-in. (15.2 cm) in forward-rearward slide. They sit on mud-proof supports and have removable cushions for easy cleaning.
- Harness system ready
The X3 900 HO comes standard with 3-point seat belts, but is 4- and 5-point harness ready.
- Easy to accessorize
The Maverick X3 900 HO side-by-side vehicle is simple to accessorize to let owners maximize their customization efforts. Available genuine Can-Am and valued aftermarket partnership accessories include bumpers, harness kits, graphics, cargo racks and roofs to name only a few. Installation is designed to be quick and easy, especially when using Can-Am LinQ accessories. An integrated wiring channel and ground post was incorporated for easy electronics installation.
- TTX rear suspension
The Can-Am Maverick X3 900 HO side-by-side vehicle features the amazing four-link TTX suspension with its trophy truck-inspired trailing arm and three links that control wheel toe for optimal geometry during extra high wheel travel. Components are perfectly matched for unparalleled power transfer to the wheels and high traction with virtually no bump steer. The suspension system, with its 18-in. (45.7 cm) of travel — which is better than the competition — offers precision control, traction and more confidence.
- Front A-arm suspension
The Can-Am Maverick X3 900 HO has a double A-arm and sway bar setup that delivers 18-in. (45.7 cm) of travel.
- FOX Podium piggyback shocks
The Maverick X3 900 HO vehicle wears FOX HPG 2.5 piggyback shocks, front and rear, offering adjustable preload and 18-in. (45.7 cm) of travel.
ULTRA-EFFICIENT, LIGHTWEIGHT CHASSIS
- Ultra-light and industry-leading cage rigidity
The Can-Am Maverick X3 900 HO vehicle features an ultra light, rigid chassis made of cutting-edge Dual-Phase 980 steel, which is lighter than traditional steel. This allows the chassis to deliver 53 percent better torsional stiffness while being 20 percent lighter than its closest competitor. It is a 1.85-in. (4.7 cm) tubular, fully welded design – no bolts, no extra pieces – with dedicated servicing zones in case of repair or replacement. The cage is fully ROHVA compliant and creates a protective barrier around both driver and passenger.
- Enhanced protection
The Can-Am Maverick X3 900 HO vehicle offers protection for all occupants with its standard high-strength DP 980 steel black cage, integrated front bumper, quarter doors, full HMW skid-plate and capable 3-point seat belts.
SHARPEST HANDLING FEATURES
- Optimal stability
The 102-in. (259.1 cm) wheelbase, which is a full 12-in. (30.5 cm) longer than the closest competitor, improves off-road capability by supplying more comfort and a confidence-inspiring ride at both high speeds and technical crawls. The elongated wheelbase, optimal weight distribution (44/56) and ample ground clearance [13-in. (33 cm)] translates to optimum performance and stability in even the most challenging terrain.
- Superior grip and control
The Can-Am Maverick X3 900 HO side-by-side vehicle sports 14-in. (35.6 cm) black, aluminum wheels with six-ply, 27-in. (68.6 cm) Maxxis Bighorn 2.0 tires. The proven tires have sturdy lugs and a non-directional tread pattern for a smoother ride over a wide variety
The Can-Am Maverick X3 900 HO features a high-performance suspension with ideal front and rear balance (44% front / 56% rear) and premium FOX 2.5 Podium shocks. It rests on an ultra-efficient, lightweight chassis and delivers superb performance through optimized handling. Ample braking and a strategic design also enhance the driving experience.
- Extraordinary braking power
The Can-Am Maverick X3 900 HO vehicle uses the same dependable braking package as its larger-bore siblings for superior stopping performance. The vehicle includes large, twin piston calipers and 262 mm discs up front, and twin piston calipers and 248 mm discs at the rear. Each has high-performance brake pads for superior control. The master cylinder is located inside the cockpit for better protection.
- Optimized ride control
All Can-Am Maverick X3 side-by-side vehicles have many driver-centric features. An updated high-torque, Tri-Mode DPS system (Min, Med, Max) is designed to optimize the desired amount of steering assist for trail riding and in extremely difficult terrain where management at slow speed is a necessity. All Maverick X3 models come with Intelligent Throttle Control (iTC), which provides smooth throttle delivery even if the driver’s foot is bouncing in rough terrain. The Maverick X3 900 HO vehicle also has the race-inspired, quick-ratio steering wheel with just 1.5 turns lock-to-lock, for precise control.
CONVENIENCE AND MAINTENANCE
- Increased fuel capacity
Owners will focus more on driving and less on refueling with the Can-Am Maverick X3 vehicles, as they offer a 10.5-Gal. (40 L) fuel tank, which is the largest in the industry.
- Ample storage/cargo capacity
The Can-Am Maverick X3 900 HO side-by-side vehicle offers a total of 2.5-Gal. / 9.4 L of storage by way of a fixed glove box, center console and two cup holders, because added convenience improves the overall performance package. Externally, there is a rear rack with a 200-lbs. (91 kg) capacity. The rack works with the Can-Am LinQ quick-attach accessory system, allowing easy installation and removal of a storage box, rack extension, bag or other items. The centre console includes a lighter-type DC outlet as well.
- Latest ignition technology
The Can-Am Maverick X3 features an automotive-like, keyless start-stop button activated by a Radio Frequency Digitally Encoded Security System (D.E.S.S.) key. It also includes a separate learning key that limits speed and acceleration for novice drivers.
- Simple maintenance
The Can-Am Maverick X3 900 HO is designed for ease of maintenance. The front hood allows quick access to fluids and fuses, while snapfitted body panels allow for quick access to other key components. The hood and grill are also removable for easy radiator cleaning. Additionally, there is easy access to DIY pieces, including the radiator, battery, oil filter and fuel pump.
- Maintenance free first year
The Can-Am Maverick X3 900 HO, like other Maverick X3 vehicles, has no break-in maintenance required and only an annual maintenance schedule, which means reduced total maintenance costs. The yearly advised maintenance is at 1,865 miles (3,000 km) or 200 hours.
NEW ROTAX ACE ENGINE PACKAGE
- 90hp Rotax engine
The all-new 2018 Maverick X3 900 HO benefits from the X3 family’s revolutionary design, style and industry influence but offers more affordability for the off-road crowd. The Maverick X3 side-by-side vehicle’s 90hp Rotax ACE inline triple-cylinder 900cc engine delivers ample performance for a wide variety of conditions. Don’t let the reduced horsepower fool you, though, as the Maverick X3 900 HO vehicle is made to enthrall while it induces smiles. The Rotax ACE engine is located in the rear of the chassis, resulting in lower cockpit noise, vibration and heat. It also has iridium spark plugs, for improved combustion, longer life and lower maintenance.
- Powerful 650-W magneto
Whether it is to install high-performance lighting or a ground-shaking sound system, the Can-Am Maverick X3 side-by-side vehicle’s high-output, 650-W magneto can handle it.
ADVANCED AIRFLOW DYNAMICS
- Improved airflow
The Can-Am Maverick X3 900 HO side-by-side vehicle features a highly efficient airflow system that’s optimized from intake to exhaust to deliver superb engine efficiency and performance. The intake areas are strategically positioned high and dry for excellent mud/water protection.
- Triple, dedicated air intake
There are three oversized air intakes located behind the driver that deliver a constant supply of clean air – two to cool the CVT and one for high airflow to the engine. The Maverick X3 family also features an easy-to-access, long-lasting Donaldson air filter that’s purpose-built for performance.
- Enhanced exhaust
The Can-Am Maverick X3 900 HO vehicle has a large, sport-inspired exhaust with signature sound, which only a Rotax 3-cylinder engine can deliver!
- High-response QRS-X CVT
The Can-Am Maverick X3 900 HO side-by-side vehicle has the same high-performance QRS-X CVT transmission and a compact gearbox that’s optimized to enhance throttle response without torque interruption. It has a smooth and predictable engagement, and stays at
an optimal RPM so the focus can be on driving and overall performance instead of shifting, even in the most severe conditions like hill climbing or muddy terrain.
- Durable QRS-X CVT design
The QRS-X CVT transmission’s drive belt uses a special compound to produce a stiffer belt with more lateral rigidity. The Can-Am Maverick X3 family’s enormous power transfers into extreme capability using the long, wide CVT belt and a robust three-roller pulley design that includes integrated cooling fins for enhanced airflow. It is a gear-on-gear system with no rear prop shaft for more durability and no maintenance required.
The Maverick X3 900 HO vehicle’s 90 HP Rotax ACE 900cc triple-cylinder engine produces an exceptional amount of torque and responsiveness.
- Advanced cooling
The Can-Am Maverick X3 900 HO side-by-side vehicle features the same advanced airflow design for optimized CVT cooling which provides better protection for longer-lasting CVT components (e.g. longer belt durability) and less maintenance. More fins were added to the fan to enhance heat transfer.
- Simple transmission maintenance
The Can-Am Maverick X3 900 HO side-by-side vehicle was designed for ease-of-maintenance with the transmission system by way of quick access to the filters, an easily removable CVT belt and easy-to-access CVT cover drain plug.
Maverick X3 900 HO specific features:
- 90hp Rotax ACE recalibrated engine (no intercooler, no turbo)
- Tri-mode DPS
- Double A-arm front suspension
- TTX rear suspension arched lower links
- FOX 2.5 Podium Piggyback front and rear shocks
- 18-in. (47.5 cm) of front/rear suspension travel
- 13-in. (33 cm) of ground clearance
- 64-in. (162.5 cm) wide
- 102-in. (259.1 cm) wheelbase
- 27-in. (68.6 cm) Maxxis Bighorn 2.0 tires
- 14-in. (35.6 cm) black aluminum wheels
- Quarter doors
- 3-point seat belts
- Full HMW skid plate
- Black cage
- Can-Am Red plastic
- Starting at $17,999 USD
UPCOMING DIRTTRAX AIRTIMES
Can-Am Racers Earn Three Prestigious Off-Road Championships With Maverick X3 Side-by-Side Vehicle
LATEST VIDEOS View All
Dirt Trax Television 2017 - Episode 25 Sneak Peek
December 11, 2017
Coming up on an all-new episode of Dirt Trax Television. . .
Dirt Trax Television 2017 - Episode 24 Sneak Peek
December 4, 2017
We celebrate 10 years of the Polaris RZR!
Full REVIEW: 2018 Can-Am Maverick Trail
November 30, 2017
Luke conducts a highly anticipated review of the 2018 Can-Am Maverick Trail.
Design and Utility of the 2018 Yamaha Wolverine X4
November 29, 2017
Experience a real outdoor adventure.
Top Gear View All
December 11, 2017
Pro Point 180 Multi-Process MIG-ARC-TIG
The Pro-point Multi-Process Series are leading edge inverter-based multi-process welder that can perform superior welds in either ...
Ask Motorhead View All
April 18, 2017
WILDCAT TRAIL VS. WILDCAT SPORT
Would you be happier with a Wildcat Trail or would you go for a Wildcat Sport if you had your choice?
Headlines View All
December 12, 2017
Can-Am Racers Earn Three Prestigious Off-Road Championships With Maverick X3 Side-by-Side Vehicle
Can-Am® X-Team drivers won three prestigious racing championships with the Can-Am Maverick® X3® Turbo R side-by-side vehicle in its ...
Tourism View All
November 17, 2017
WIN AN OFF-ROAD FAMILY ADVENTURE GETAWAY
Win an Off-Road Family Adventure Getaway at Spearhead Trails in beautiful Southwest Virginia.